| |
Afco Low
Friction Ball Joints
Afco's new low
friction ball joints are designed with 2 ft. lbs. of resistance, the
force required to move the stud of the ball joint. Compare this with
standard replacement joints, with as high as 50 ft. lbs. of resistance.
Low friction ball joints:
• Free up suspension to more consistent chassis tuning
• Remove suspension bind
• Meet or exceed standard ball joint strength
• Improve weight transfer
• Are stock appearing
Available to replace
the most popular upper and lower ball joints in use, the LF ball joints
are listed with their standard counterparts. |
|
Longer GM
Ball Joints 
Taller ball joints allow you to raise your roll center. Larger and
stronger than stock GM. Spindles may have to be reamed.
|
Part # |
Description |
Price |
| CAP20032-1 |
Standard
Upper Ball Joint |
$17.95 |
| AFC20032-1LF |
Low
Friction Upper Ball Joint |
$39.95 |
(fits stock a-arms with some redrilling; fits most tubular upper a-frames)
|
Part # |
Description |
Price |
| CAP20038-1 |
Standard
Lower Ball Joint |
$17.95 |
| AFC20038-1LF |
Low
Friction Lower Ball Joint |
$39.95 |
(can be welded directly into a-frame or use sleeve sold below)
|
Part # |
Description |
Price |
|
CAP20046 |
Sleeve |
$10.95 |
(welds into lower a-frame so ball joint can be pressed in)
|
Chrysler Screw In Ball Joints
 The
most widely used ball joints for race cars. Heavy duty threaded-in
design. Use handy weld in sleeves when fabricating a-frames.
Spindles may have to be reamed.
|
Part # |
Description |
Price |
|
CAP20036 |
Standard
Lower Ball Joint |
$25.95 |
| AFC20036LF |
Low
Friction Lower Ball Joint |
$39.95 |
(K-727 - 2" diameter at threads)
|
Part # |
Description |
Price |
|
CAP20042 |
Plain
Threaded Sleeve |
$10.95 |
(Weld in type for K-727 Ball Joint)
|
Part # |
Description |
Price |
|
CAP20041 |
Flanged
Threaded Sleeve |
$10.95 |
(Weld in type with flange for K-727 ball joint)
|
Part # |
Description |
Price |
| CAP20034 |
Standard
Upper Ball Joint |
$19.95 |
| AFC20034LF |
Low
Friction Upper Ball Joint |
$39.95 |
(K-771 - 1 3/4" diameter at threads)
|
Part # |
Description |
Price |
| CAP20043 |
Plain
Threaded Sleeve |
$10.95 |
(Weld in type for K-772 ball joint)
|
Part # |
Description |
Price |
| CAP20043F |
Flanged
Threaded Sleeve |
$10.95 |
(Weld in type with flange for K-772 ball joint)
|
Tapered
Reamer 
Resize spindles to accept larger heavy duty racing ball joints. 6
flute spiral design allows smooth operation with minimal tool wear.
1/2" shank.
|
Part # |
Description |
Price |
|
CMS80770 |
Tapered Reamer
|
$99.95
|
|
|
(1 1/2" per ft. taper for 20031, 33, 34, 35, 36 ball joints)
|
CMS80771 |
Tapered Reamer
|
$99.95
|
|
|
(2" per ft. taper for 20032, 32-1, 38, 38-1, 39 ball joints)
|
|
Ball Joint Socket 
Fits Chrysler type screw-in ball joints. Uses
1/2" rachet.
| Part # |
Description |
Price |
| RCPTS-10 |
Fits
CAP20034 & CAP20035 Ball Joints |
$22.95 |
| RCPTS-11 |
Fits
CAP20036 (K-727) Ball Joint |
$22.95 |
|
Next Back
Index |
